Accessories

(2) EV DC-One 2x6 Loudspeaker Processor
(1) Crown XTi 2000
(1) Crown XTi 6000
(2) Crown XTi 6002
(1) 40' 4 ch. XLR Fan to Fan
(1) 2' Dual Edison 12/3 to 208/240 Duplex
(2) 2' PowerCon Breakin (From Edison)



Product Description

Our 100 X-Array amp racks are optimized for Electro-Voice X-Array 4 way configurations as well as other 4 way speaker systems. These amp racks are capable of running at 120V, 208V, and 240V.

- Input panel includes 2 PowerCon inlets as well as 4 XLR inputs routed to processor inputs A through D respectively which is paralleled with a locking Neutrik RJ45 input connector for use with our 4 channel CATDRIVE Cat5e/Cat6 snake systems.


- Output panel includes 2 NL8 left and right outputs as well as 2 NL4 left and right outputs for subwoofers. Pinset 1 on the NL4 connectors are wired for subs on the bottom XTi6002 and pinset 2 is N/C. Pinsets 1 and 2 on the NL8 connectors are paralleled with the XTi6002 driving the low mids for use with X-Array wiring scheme, while pinset 3 is wired for high mids on the above XTi6000 and pinset 4 is wired for highs on the above XTi2000.

These systems are driven with two Electro-Voice DC-One processors, the top of which is for the left side of the system, and the bottom being for the right side of the system. The bottom processor can be set as a slave of the top processor for ease of use. Outputs of each DC-One for EV X-Array are as follows:
1. Sub
2. Sub Cardioid [Outputs on panel]
3. Xb
4. Xn LF or Xb
5. Xn/f MF
6. Xn/f HF

- This amp rack is also equipped with a wireless network built in for the ability to monitor amp meters real-time via Crown's Audio Architect software as well as Electro-Voice's DC-One control software. Connection is made via a USB Over Network hub housed within the rack. (USB Over Network software required) Network credentials are posted in the top drawer of the rack.

Attachments

XTi Manual

DC-One Manual